Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
T7406 base station switches
- Thread starter Audioman1
- Start date
endlesswinter
IS-IT--Management
you can install 3 base stations the dip swithes will be set to offset other bases. If you only have one base dont worry about switches. just config the handsets!
- Thread starter
- #3
endlesswinter
IS-IT--Management
yes just assign the desired lines to the extension. Programs the same as regular extenion.
The switches determine the frequency range that the base operates at. By changing the switches, you can operate 2 bases (3 phones each) in the same area. As long you only have one base, there is no need to change the settings. I dont have the specifics handy, but it is included in the 7406 documentation that comes with the phone.
Jeff
Jeff
- Status
Similar threads
- Locked
- Question
