Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

T1 problem 1

Status
Not open for further replies.

acewarlock

Technical User
Joined
Sep 16, 2002
Messages
9,370
Location
US
I have a T1 that keeps going up and down and Qwest is telling me I need to change my protcol to NI1 from NI2 as they don't support NI2 on there DMS. To change this do I need to remove the Loop fron the CFN before I can out the trunks and then out the RDB so I can rebuild the RDB with NI1?
 
Ok I see I need to make a change in the CFN on the
ADAN DCH 11 but it won't let me change it.
 
I rebuilt everything and Qwest still couldn't get it to work so now they want me to change it to DMS250 instead of SL1, so I'm waiting until mondya to do it.
 
They should have done D250 from the get-go. Hope they smooth out.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top