I have 3 private line T1s going into two VWIC-2MFT-T1 cards that are all on the same NM. These VWICs give me four T1 ports of which I am using the last three. The problem I'm having is that I get a tremendous amount of line code violations, slips and other errors on my Cisco 3662 (in corporate office). On the other ends of these T1s, I don't get the errors. These remote ends are set with internal clocking while the 3662 ends are set to line. I have called AT&T and of course they test the line fine and show it to be set up for ESF and B8ZS. I don't know what the problem is. The demarc is extended about 300 ft but playing with the cable length didn't make any difference. We have a PRI that goes into a PBX and it doesnt have any slips or errors. Any help would help. Here is a sample:
T1 3/1 is up.
Applique type is Channelized T1
Cablelength is short 133
Description: T1 to Las Vegas
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20000922, FPGA: 15
Framing is ESF, Line Code is B8ZS, Clock Source is Line.
Current port master clock: recovered from controller 3/1
Data in current interval (11 seconds elapsed):
163 Line Code Violations, 445 Path Code Violations
11 Slip Secs, 0 Fr Loss Secs, 11 Line Err Secs, 1 Degraded Mins
10 Errored Secs, 9 Bursty Err Secs, 1 Severely Err Secs, 0 Unavail Secs
Val.3662#sh controller T1 3/2
T1 3/2 is up.
Applique type is Channelized T1
Cablelength is short 133
Description: T1 to Sacramento
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20000922, FPGA: 15
Framing is ESF, Line Code is B8ZS, Clock Source is Line.
Current port master clock: recovered from controller 3/1
Data in current interval (36 seconds elapsed):
191 Line Code Violations, 457 Path Code Violations
36 Slip Secs, 0 Fr Loss Secs, 27 Line Err Secs, 0 Degraded Mins
36 Errored Secs, 28 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Val.3662#sh controller T1 3/3
T1 3/3 is up.
Applique type is Channelized T1
Cablelength is short 133
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20000922, FPGA: 15
Framing is ESF, Line Code is B8ZS, Clock Source is Line.
Current port master clock: recovered from controller 3/1
Data in current interval (45 seconds elapsed):
1355 Line Code Violations, 2703 Path Code Violations
45 Slip Secs, 0 Fr Loss Secs, 45 Line Err Secs, 0 Degraded Mins
43 Errored Secs, 43 Bursty Err Secs, 2 Severely Err Secs, 0 Unavail Secs
Thanks
Robert
T1 3/1 is up.
Applique type is Channelized T1
Cablelength is short 133
Description: T1 to Las Vegas
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20000922, FPGA: 15
Framing is ESF, Line Code is B8ZS, Clock Source is Line.
Current port master clock: recovered from controller 3/1
Data in current interval (11 seconds elapsed):
163 Line Code Violations, 445 Path Code Violations
11 Slip Secs, 0 Fr Loss Secs, 11 Line Err Secs, 1 Degraded Mins
10 Errored Secs, 9 Bursty Err Secs, 1 Severely Err Secs, 0 Unavail Secs
Val.3662#sh controller T1 3/2
T1 3/2 is up.
Applique type is Channelized T1
Cablelength is short 133
Description: T1 to Sacramento
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20000922, FPGA: 15
Framing is ESF, Line Code is B8ZS, Clock Source is Line.
Current port master clock: recovered from controller 3/1
Data in current interval (36 seconds elapsed):
191 Line Code Violations, 457 Path Code Violations
36 Slip Secs, 0 Fr Loss Secs, 27 Line Err Secs, 0 Degraded Mins
36 Errored Secs, 28 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Val.3662#sh controller T1 3/3
T1 3/3 is up.
Applique type is Channelized T1
Cablelength is short 133
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20000922, FPGA: 15
Framing is ESF, Line Code is B8ZS, Clock Source is Line.
Current port master clock: recovered from controller 3/1
Data in current interval (45 seconds elapsed):
1355 Line Code Violations, 2703 Path Code Violations
45 Slip Secs, 0 Fr Loss Secs, 45 Line Err Secs, 0 Degraded Mins
43 Errored Secs, 43 Bursty Err Secs, 2 Severely Err Secs, 0 Unavail Secs
Thanks
Robert
