Guest_imported
New member
- Jan 1, 1970
- 0
can u tell me what is the command to set the new time
Burcin
thanks
Burcin
thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
System time isnt correct
- Thread starter Guest_imported
- Start date
- Status
You can use the following:
SET TIME = HH:MM:SS
where HH = hours, MM = minutes & SS = seconds. You may be asked to confirm the time change, just answer Y.
Only use this if absolutely necessary, or if you just have a single server. If a multiple server environment, this should only be performed on the Reference or Primary server. -----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------
SET TIME = HH:MM:SS
where HH = hours, MM = minutes & SS = seconds. You may be asked to confirm the time change, just answer Y.
Only use this if absolutely necessary, or if you just have a single server. If a multiple server environment, this should only be performed on the Reference or Primary server. -----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------
- Status
Similar threads
- Locked
- Question
- Locked
- Question