Feb 6, 2009 #1 tomboy10 Technical User Joined Feb 1, 2009 Messages 44 Location GI Hi I tend to open a VPN to my lan and check the status with system status using the lan address. can this be done over wan, if so wot port do i open? many thanks Tom
Hi I tend to open a VPN to my lan and check the status with system status using the lan address. can this be done over wan, if so wot port do i open? many thanks Tom
Feb 6, 2009 #2 amriddle01 Programmer Joined May 2, 2007 Messages 23,938 Location GB I'm sure it configurable (on login and in system) but by default is the Service base TCP port 50804 ACS - IP Office Implement "I'm just off to Hartlepool to buy some exploding trousers Upvote 0 Downvote
I'm sure it configurable (on login and in system) but by default is the Service base TCP port 50804 ACS - IP Office Implement "I'm just off to Hartlepool to buy some exploding trousers
Feb 6, 2009 #3 amriddle01 Programmer Joined May 2, 2007 Messages 23,938 Location GB Never tried across the WAN though, like you I use VPN or ISDSN dial-in ACS - IP Office Implement "I'm just off to Hartlepool to buy some exploding trousers Upvote 0 Downvote
Never tried across the WAN though, like you I use VPN or ISDSN dial-in ACS - IP Office Implement "I'm just off to Hartlepool to buy some exploding trousers