system monitor info

[tjcom]

I keep getting this error periodically. Can't figure out what is causing this......

26371mS PRN: TFTPServer::RRQ(from 192.168.42.13) nasystem/licence_list
26371mS PRN: TFTP:: Too Many Clients (RRQ) 32
26372mS PRN: TFTPServer::RRQ(from 192.168.42.13) nasystem/call_info/0.1486.0
26372mS PRN: TFTP:: Too Many Clients (RRQ) 32
27347mS PRN: TFTPServer::RRQ(from 192.168.42.13) nasystem/call_info/0.1486.0
27348mS PRN: TFTP:: Too Many Clients (RRQ) 32
28321mS PRN: TFTPServer::RRQ(from 192.168.42.13) nasystem/call_info/0.1486.0
28321mS PRN: TFTP:: Too Many Clients (RRQ) 32
29293mS PRN: TFTPServer::RRQ(from 192.168.42.13) nasystem/call_info/0.1486.0
29293mS PRN: TFTP:: Too Many Clients (RRQ) 32
30266mS PRN: TFTPServer::RRQ(from 192.168.42.13) nasystem/call_info/0.1486.0
30266mS PRN: TFTP:: Too Many Clients (RRQ) 32
31238mS PRN: TFTPServer::RRQ(from 192.168.42.13) nasystem/call_info/0.1486.0
31239mS PRN: TFTP:: Too Many Clients (RRQ) 32
32209mS PRN: TFTPServer::RRQ(from 192.168.42.13) nasystem/call_info/0.1486.0
32210mS PRN: TFTP:: Too Many Clients (RRQ) 32
33189mS PRN: TFTPServer::RRQ(from 192.168.42.13) nasystem/call_info/0.1486.0
33190mS PRN: TFTP:: Too Many Clients (RRQ) 32

Any one experience this problem?

Thanks

 

[JeSTeROCK]

What has the ip address 192.168.42.13 ?

 

[kholladay]

Any time I have seen this before it was do to having two different versions of software on an SCN. Is this a multi-site system and do all sites have the same software load?

Kyle Holladay
Certified: ACACN, ACSCI, ACSCM, TIA-CTP
"If it worked the way it should you wouldn't need me