System Compliance Profiler - No Data

[mrtoledo]

I am running ePolicy 3.0.2a Patch 6 with System Compliance Profiler 1.0.1. Initiallty I had all of the problems everybody had getting the reports in the console. The reports appear now, however only one report has data, and it reports that all of the machines as "Comptuers not yet scanned with the current policy".

I appears that I pushed the agent to the clients OK, and scheduled the scan on the client. How can I be sure the client scan is working and that it is reporting back to the server. (All of these clients work with the DAT file updates in EPO).

http://www.shankomatic.com

 

[mrtoledo]

Has anyone ever got successful System Compliance Reports from EPO? Still having no luck on this issue?

http://www.shankomatic.com

 

[JimmyZ1]

SCP is kind of tricky, If you want to check for machine that are not compliant you have to search for the machines that are compliant and whatever is left is what you're looking for, I'm not sure about log files to see if it's running or not, I know it will show up on the EPO agent log that the SCP agent has run, but we've only tried it on our test box... Had a bunch of problems with the reports and configuring rules... Really don't have alot of time to mess with it so it got put on the back burner

hope this helps

Doh!!

 

[Windexx]

This sounds a bit silly but...make sure that you log in with the epo admin account at least one time after installation or nothing will show up.

 

[mrtoledo]

After a lot of digging it tracked it down to the server was never taking the data from the client. Part of fixing the problem was to start over with a clean install of EPO, by unintsalling and reinstalling. However the uninstall process did not remove the System Compliance Profiler Client from the ePO server. After manually uninstalling the SCP client and installing back the data started to show up from the clients.

http://www.shankomatic.com

 

[nobby1]

I have two ePO servers, one in the UK and the other in the US. Both have 3.02a and Patch 7. on the US server SCP is not working on either 1.0 or 1.0.1. I have removed and reinstalled both many times, still not working.. even McAfee has not have an answer.