Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SX200 ICP

Status
Not open for further replies.
Technorth

Technorth

ISP
Joined
Sep 4, 2013
Messages
9
Location
CA
Sx 200 ICP has crashed. On restart the 200ICP clears "disk configuration is complete" but then gets stuck at "Loading /ata00/Kts8250.vx". I suspect it is a hardware issue but not sure if it is a hard drive or control board etc.

 
Sort by date Sort by votes
Is the 200 an AX? If so, AX cabinets use compact flash cards; not hard drives.
 
Upvote 0 Downvote
if it is the hard drive replace with a flash, I haven't used a hard drive for years and even with the new ones I removed the hard drive and used a flash
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

idahomitel
  • Question Question
Assigning static ip address sx200 icp 5340
Replies
2
Views
168
idahomitel
idahomitel
C
  • Locked
  • Question Question
Mitel Sx200 digital
Replies
7
Views
679
The mitel guy
The mitel guy
idahomitel
  • Question Question
SIP/PRI SX 200 ICP Dividing channels for different trunk groups
Replies
10
Views
342
idahomitel
idahomitel
The mitel guy
  • Locked
  • Helpful tip Helpful tip
Mitel sx200 series licensings and passwords
Replies
5
Views
1K
jpruder
jpruder
jpruder
  • Locked
  • Question Question
SX200 LW19 magicrom.bin
Replies
0
Views
284
jpruder
jpruder

Part and Inventory Search

Sponsor

Back
Top