Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SX-200 MX won't start up | In via Hyperterminal

Status
Not open for further replies.

norstarboston

IS-IT--Management
Nov 20, 2002
110
US
Came in too the office this morning. Phone had no dial tone. Pulled the plug to reset and now nothing. Blank sets. Plugged a laptop in and watched the boot sequence via hyperterminal. Seems to go ok but eventually stops at:

FAT handler information:
------------------------
- allocation group size: 4 clusters
- free space on volume: 1,169,489,920 bytes

Won't move from this screen. Sets still dead. Anyhthing I can try? I called my vendor but they may not make it today. We are dead in the water. Help would be very much appreciated. Thank You!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top