Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Swapping two SLT or two MLDT....
- Thread starter mdjason
- Start date
Try CHA STEN.
You can move stations to unassigned ports, but not simply swap them. If you are looking to swap two locations, you need a third unassigned port. Move ST 1 on EN 1 to unassigned EN 2, move ST 3 on EN 3 to now unassigned EN 1, move ST 1 on EN 2 to now unassigned EN 3.
If you are on site, experience suggests it's much easier to swap the cross-connect.
You can move stations to unassigned ports, but not simply swap them. If you are looking to swap two locations, you need a third unassigned port. Move ST 1 on EN 1 to unassigned EN 2, move ST 3 on EN 3 to now unassigned EN 1, move ST 1 on EN 2 to now unassigned EN 3.
If you are on site, experience suggests it's much easier to swap the cross-connect.
- Status