sv9100 netlinked / 2 music on holds and 2 external paging systems

[SammyGF]

Hello Everyone, My current issue is I have 2 companies that share a PBX and they each want their own music on hold and their own overhead paging. I have an SV9100 that has 6 cabinets. 3 are net-linked to the other three. This means I have 2 GCD-CP10 cards in the system (each with 2 aux audio in/out jacks). I was wondering if anyone knows a way to use the aux ports on the second GCD-CP10 card so I could have 2 input/outputs on each card. When I go into the programming only the first cards Aux ports are listed as available.

I had also read up on the PGD(2)-U10 ADP device that would give me more in/outs but I was hoping to solve this issue without buying anything.

Any information will help.
Thanks,
-Sam

 

[belevedere]

When External MOH is assigned, the AUX1 or AUX2 on the front of
the GCD-CP10 can only be utilized at the Primary Site. All Secondary
sites must provide the External MOH input via an ACI Input [PGD(2)-
U10 ADP].