Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Stupid questions rs 232 1
- Thread starter alm64goat
- Start date
i don't know if i got that post right in my head.let me see if i'm right...
you have something that has a rs232 port that is there to hook it up to a printer. but your printer doesn't have an rs232 port on it. is this right? that is what i believe to be correct.
if it is not, let me know so, i can expand my brain power
you have something that has a rs232 port that is there to hook it up to a printer. but your printer doesn't have an rs232 port on it. is this right? that is what i believe to be correct.
if it is not, let me know so, i can expand my brain power
-
1
- #3
Yeah, you spend about $100.00 and buy a serial/parallel buffer from global computer supplies and a 36/36 amphenol cable (parallel printer type connector on both ends) then build an interface cable from the serial port to the buffer box. Then you hook it up.
The question you will then have to answer and provision are the handshake interconnects on your 232 port.
Very simple to do, just expensive. Ed Fair
unixstuff@juno.com
Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
The question you will then have to answer and provision are the handshake interconnects on your 232 port.
Very simple to do, just expensive. Ed Fair
unixstuff@juno.com
Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
- Status
Similar threads
- Locked
- Question
- Locked
- Question