Hello All,
I've setup two Cisco AS5300's (one in London and one in Athens) and perform VOIP calls bi-directionally.
I've also setup a radius server for accounting.
After examining the CDRs from London I can see in the VOIP leg that some calls are "rejected" by the 5300 in Athens with the error code 3, which if I'm not mistaken is no route to destination.
This is correct, since I've removed this route from exiting to the PSTN.
However when I look at the POTS dial-peer in the 5300 I can see the error code 10 which is normal call clearing.
Does anybody have a clue as to what might be happening?
Thank you all in advance!
I've setup two Cisco AS5300's (one in London and one in Athens) and perform VOIP calls bi-directionally.
I've also setup a radius server for accounting.
After examining the CDRs from London I can see in the VOIP leg that some calls are "rejected" by the 5300 in Athens with the error code 3, which if I'm not mistaken is no route to destination.
This is correct, since I've removed this route from exiting to the PSTN.
However when I look at the POTS dial-peer in the 5300 I can see the error code 10 which is normal call clearing.
Does anybody have a clue as to what might be happening?
Thank you all in advance!