Jul 25, 2012 #1 bangling Vendor Joined Jul 25, 2012 Messages 2 Location PH Hi All, Need procedures replacing failed tape drive in StorageTek L40 and do I need to update its firmware after replacement? Thanks in advance.
Hi All, Need procedures replacing failed tape drive in StorageTek L40 and do I need to update its firmware after replacement? Thanks in advance.
Jul 26, 2012 #2 TekAndy Technical User Joined Mar 6, 2007 Messages 185 Location US Are you replacing the failed drive with the same type? You should be able to source a replacement with the same firmware as the one you are removing. Upvote 0 Downvote
Are you replacing the failed drive with the same type? You should be able to source a replacement with the same firmware as the one you are removing.
Jul 27, 2012 Thread starter #3 bangling Vendor Joined Jul 25, 2012 Messages 2 Location PH @TekAndy: Yes it is of same type. Am not sure if the new drive's firmware is the same as the one being replaced. Thanks Upvote 0 Downvote
@TekAndy: Yes it is of same type. Am not sure if the new drive's firmware is the same as the one being replaced. Thanks