Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Storagetek 9310 LSM still offline

Status
Not open for further replies.

Japyw

Technical User
Jul 5, 2011
5
FR
Hello Team

I'm in nightmare since this afternooon with my beautiful STK 9310, the library stay still OFFLINe and not available for ACS and dataprotector backup.
Try many IPL and warm reboot LCU and LMU but the unit still stay offline,in my LCU have "OFFLINE" Yellow light ON ,and "Proc active" light Green ON.
All IPL are fine with no errors and without FSC on the library.

The LMU for me is like a black box (i know some basic command by the CSE port) and my question is:
The LMU may be incriminated or it's communication failure between LMU and LCU ?
Does anyone has experienced this case by the past,
I join a capture from the LMU CSE Port:command LI ALL
*** Dev 00 is a 9310 LSM

ID Name Loc Frame SN
000 LCU S/N LCU Frm 02000077

ID Name Loc Part Number Serial # EC Level SW HW
001 PLS0 LSM 000308490405 10013521 00111417 01 02
002 PLS1 LSM 000308490405 10013575 00111417 01 02
003 CLQ LCU Frm 000308406620 10006009 00128012 FF 01
004 CLP0 Slot A2 000000000000 00000000 00000000 00 00
005 CLP1 Slot B2 000000000000 00000000 00000000 00 00
006 CLY Slot D2 000410264510 00000614 00029809 05 03
007 CLW Slot E2 000308402407 10005478 00092081 FF 01
008 CLX Slot S1 000309892201 10000299 00111260 01 04
009 CLZ Slot C2 000308461213 10005555 00035267 01 02
010 CLR OP Panel 000410282404 00000287 00111554 FF FF
011 CLT LCU Mtbd 000410329207 00138329 00035585 02 02
012 CLK AC Suply 000311566007 30330003 00116918 FF FF
013 CDX DC Suply 000404576607 10000643 00041915 FF FF
014 CMZ CAP Door 000404536711 00000679 00035283 FF FF


thanks in advance.
JP
 
Hi Guys
More news for this case, the library was still offline because there is a calibration pb with hand 01
after replace it, library goes online and ready to work again.

For me it's closed now

Thx
 
hi

That's good news... always try to look at the logs... the logs are very good...

sometimes they also go in a downgrade state... open/closing the small key door - also helps...

once again well done!

 
Your first action with getting a 9310 status report is to log into the LMU utiliy <UTL> envionment.
Type ST DEV=0 (where the zero means LSM 0, change as required).
You will get a report on the status of all important parts, either OK (which is good) or INOP (which is bad).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top