Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Stop users from saving to their user directory on C: of application servers
- Thread starter Breezeman
- Start date
- Thread starter
- #3
you could map the client local drive.
To enable legacy client drive mapping on XenApp 6 and XenApp 6.5, the following registry key must be set on the server:
Caution! This procedure requires you to edit the registry. Using Registry Editor incorrectly can cause serious problems that might require you to reinstall your operating system. Citrix cannot guarantee that problems resulting from the incorrect use of the Registry Editor can be solved. Use the Registry Editor at your own risk. Back up the registry before you edit it.
Create this registry key if it does not exist:
HKEY_LOCAL_MACHINE\Software\Citrix\UncLinks
Under the key, create a DWORD UNCEnabled.
Set the value of UNCEnabled to 0.
To enable legacy client drive mapping on XenApp 6 and XenApp 6.5, the following registry key must be set on the server:
Caution! This procedure requires you to edit the registry. Using Registry Editor incorrectly can cause serious problems that might require you to reinstall your operating system. Citrix cannot guarantee that problems resulting from the incorrect use of the Registry Editor can be solved. Use the Registry Editor at your own risk. Back up the registry before you edit it.
Create this registry key if it does not exist:
HKEY_LOCAL_MACHINE\Software\Citrix\UncLinks
Under the key, create a DWORD UNCEnabled.
Set the value of UNCEnabled to 0.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question