Stop ICM busy/error tone on SLT when hung up

[Sharonfe]

Hello,
I want to stop the busy/error tone on specific SLT station when the ICM call ended and the SLT did not hung up yet (The other station hung up).
I need it for Pancode/doorphone systems because when you call to doorphone and hung up after few secends the busy/error tone continue to be heard until the doorphone timer close the channel.

Clarification:
I mean the busy/error tone, not the howling tone(this tone stoped already), I need fully silent if can...

My System is - LDK100 ver 3.9Gh

Thanks in advance for your help,
Sharon.

 

[doktor]

Put the SLT station in to a station group and let the overflow / diversion go to another SLT or extension number with VMIB+drop.

///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx

 

[Sharonfe]

Thanks for your reply !
I don't understand the: "overflow / diversion"
I understand the first step, to put the two SLT's that I need in to a station group... but I did not understand the second step.

Thanks in advance,
Sharon.

 

[doktor]

Oh. I guess I have given you a wrong answer.

You need to check your timers for minimun and maximun hook flash timer.
I guess that you have also problems with analog phones.

In PGM182 you have the "SLT Maximum Hook Flash Timer" and "SLT Minimum Hook Flash Timer".

According to the Hook Flash Timer setting for your country, you can set these timers accordingly.
In my country we set:

"SLT Maximum Hook Flash Timer" set to 15(*10msec)
"SLT Minimum Hook Flash Timer" set to:5 (*10msec)

SLT can gice you this kind af problem, so it is important to havethe timers set correctly.

///doktor
____________________________________

http://www.kandu.dk/spg153996.aspx

 

[xs650]

when LDK100 is similiar to LIK you first get the error tone
and after that the howling tone.
In LIK these two timers can be set in the system timers.
The error tone timer is available since 5.6Bf(since 2012), before that it was hard coded,
so maybe it is still hardcoded in LDK100...