joemama613
IS-IT--Management
Does anyone know of anywhere on the web that I can get a step by step guide to setting up a network printer in SCO openserver 5?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Step-by-Step Network Printer Setup
- Thread starter joemama613
- Start date
- Status
stanhubble
MIS
It is pretty straight forward...if you know:
-how the printer is connected to the network
-what protocols it is listening to
The simplest is a printer listening to LPD.
- enable remote printing
- scoadmin printer -> add -> remote ...enter specifics
If it is using HP protocols (not emulations)
then see: pcunix's faq on printing to HP's
If it is a windows shared printer then use samba's smbclient or the smbprint scripts.
-how the printer is connected to the network
-what protocols it is listening to
The simplest is a printer listening to LPD.
- enable remote printing
- scoadmin printer -> add -> remote ...enter specifics
If it is using HP protocols (not emulations)
then see: pcunix's faq on printing to HP's
If it is a windows shared printer then use samba's smbclient or the smbprint scripts.
- Thread starter
- #3
joemama613
IS-IT--Management
Stanhubble,
Thanks. But how do you enable remote printing?
Joe
Thanks. But how do you enable remote printing?
Joe
stanhubble
MIS
Sorry, this is for enabling LPD remote printing.
scoadmin printer -> system -> print services -> select
scoadmin printer -> system -> print services -> select
- Status
Similar threads
- Locked
- Question