Using CM5.2 on twin S8730 servers. We have several locations hanging off of these servers. One of those locations can't call to the main location by dialing 0. Whenever they dial 0 the trace reads: "denial station". The most recent hex code was 0x1086. How do I enable 0 across different TN's even when station-to-station works fine? We have 0 defined in the Dial Plan Analysis as ATTD. thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!