config5623
Programmer
Hi all, I've not worked on Nortel from some years now. Could someone tell me the LD and procedure to stat a TN then disable /enable TN then IDU that TN?
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Stat TN dsbl and enbl then IDU
- Thread starter config5623
- Start date
- Status
Firebird Scrambler
Systems Engineer
Go into LD 32 and key in STAT (TN) C/R
To disable a TN, do DISU (TN) C/R
And to enable a TN, do ENLU (TN) C/R
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
To disable a TN, do DISU (TN) C/R
And to enable a TN, do ENLU (TN) C/R
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
- Status
Similar threads
- Question
- Locked
- Question