startalkflash-- no response

[phoneguy422]

Ive got a 6 x 15 DR5 with a flash 1.4- and all my feature codes get - innactive feature- f9*1 also gets this - ive rebooted ksu and vmail systems but cant get any response from the flash , I do have it connected to a good station port- any advice??

 

[bighands2468]

F 903 Sounds like your flash took a dump.
If 903 works, then its time to reprogram

 

[Brutalis]

it could be that your features have taken on different codes.
try using feature **XFTEST, then your config password and scroll thruogh the codes to see if they match what you had before
if F903 is the only active code then it's time to reprogram from scratch

 

[exsmogger]

Flash V1.4 doesn't use F903, only V1.9 and above. Connect to the serial port with Hyperterminal and watch the bootup sequence, 1200 8-N-1. I'd suspect a corrupt software card.

Brian Cox

http://www.jandjcommunications.com