Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
st.conf entries
- Thread starter tuka
- Start date
The robot does not need an entry, here is the entry for the LTO Drive:
You are going to need to un-comment out the line that says
> "tape-config-list= and place 5 spaces in between the word "IBM and
> ULTRIUM-TD1" on the first line and 5 spaces between the word "IBM and
> ULT3580-TD1" on the second line. It should look something like this
> once you are done:
>
> tape-config-list=
>
> "IBM ULTRIUM-TD1", "IBM Ultrium", "CLASS_3580",
> "IBM ULT3580-TD1", "IBM 3580 Ultrium", "CLASS_3580";
> CLASS_3580 = 1,0x24,0,0x45863d,2,0x00,0x01,0;
>
> ****YOU WILL NEED TO DO A "reboot -- - r" AFTER YOU MAKE THE ABOVE
> CHANGES!!!!
CoMteC17
You are going to need to un-comment out the line that says
> "tape-config-list= and place 5 spaces in between the word "IBM and
> ULTRIUM-TD1" on the first line and 5 spaces between the word "IBM and
> ULT3580-TD1" on the second line. It should look something like this
> once you are done:
>
> tape-config-list=
>
> "IBM ULTRIUM-TD1", "IBM Ultrium", "CLASS_3580",
> "IBM ULT3580-TD1", "IBM 3580 Ultrium", "CLASS_3580";
> CLASS_3580 = 1,0x24,0,0x45863d,2,0x00,0x01,0;
>
> ****YOU WILL NEED TO DO A "reboot -- - r" AFTER YOU MAKE THE ABOVE
> CHANGES!!!!
CoMteC17
- Status