Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Speed Dial Speed

Status
Not open for further replies.

dizzyphil

Programmer
Joined
Sep 26, 2003
Messages
302
Location
US
All,

Is there anyway to slow down the speed of the IP 500 dialing a speed dial? When dialing Internationally, about every 4th or 5th time, the C-LEC says it only sees about 10 digits instead of the full number. 4.2.11.

Thanks,
Dizzy

ACA-IP Office Implement
ACS-IP Office Implement
 
I don't think so. As far as I know just use the comma after the digit to slow it down. 9,18008884444 or 9,1,800,888,4444 would probaly work.

"Religion is regarded by the common people as true, by the wise as false, and by the rulers as useful"
"The lack of money is the root of all evil" [machinegun] [flip]
 
Doz,

I thought the same, I put a comma in after 011, then at random other spots in the number but, after the comma, the 500 quits sending digits.

Diz

ACA-IP Office Implement
ACS-IP Office Implement
 
it needs to dial awfully fast to be to fast for the line to recognize the digits, did you monitor the line and listened into it? Is it happening on all lines or just certain ones? try if you butt set is dialing also as fast and if it also happens.

Joe W.

FHandw., ACS

If you can't be good, be good at it!
 
It's called over a LD T1. If I monitor, I see the digits going across and out. The C-LEC is the one saying the 500 is not sending all the digits. I know it is sending but, to convince the carrier and the customer, I want to slow it down to see.

Diz

ACA-IP Office Implement
ACS-IP Office Implement
 
T1 is digital and the digits are going over via transmission of the digits encapsulated in the data stream, how can you slow that down?
or do you have analog interfaces into the T1 somehow?

Joe W.

FHandw., ACS

If you can't be good, be good at it!
 
I'm not trying to slow down the digits across the T1, I'm trying to slow down how the IP 500 dials them in speed dial. I guess I should have been more clear in my post.

Dizzy

ACA-IP Office Implement
ACS-IP Office Implement
 
Sorry I still don't get it, the speed on the phone rather on the outgoing line?
I apologize if I am thick today.

Joe W.

FHandw., ACS

If you can't be good, be good at it!
 
It's ok, I got tech support finally to fix the issue. All is well now. Don't know what they did, they went through VNC on my laptop though the DTE port.

Diz

ACA-IP Office Implement
ACS-IP Office Implement
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top