Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Speed Dial Feature Programming
- Thread starter cowboz
- Start date
This is only possible if you log on to the MD110, and use the ADCOI command.
Like this:
ADCOI:ABB=1000,TRA=0123456D4444,CLASS=0&&3;
In the example the speed dialling number is 1000, and it will dial 0123456 and wait for a new dialtone, an dthe dial 4444.
///doktor
Like this:
ADCOI:ABB=1000,TRA=0123456D4444,CLASS=0&&3;
In the example the speed dialling number is 1000, and it will dial 0123456 and wait for a new dialtone, an dthe dial 4444.
///doktor
- Status
Similar threads
- Locked
- Question
- Locked
- Question