Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SPAN to multiple ports 1

Status
Not open for further replies.
Speaker

Speaker

MIS
Sep 5, 2001
72
US
I need to mirror all the ports to my 2980G-A to two different ports (may need three in the future)

The following works for one port:

set span 2/1-2/45,3/1-3/34 2/48 inpkts enable

How do I enable mirroring to another port in addition to 2/48? (eg 3/14)

TIA
 
Sort by date Sort by votes
Just put a hub onto the 1 span port. ----------------------------------------
Wassabi Pop Tarts! Write Kellogs today!
 
Upvote 0 Downvote
How humiliating. Well, it's always the simple things that get you. Thanks.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Locked
  • Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
227
badwolf1686
B
CPM86
  • Question
Cisco isr 4331 with IOS and sip busy fail over to 2nd sip number on pbx?
Replies
0
Views
365
CPM86
CPM86
Luzbel
  • Locked
  • Question
Connecting HVAC controller to network
Replies
0
Views
410
Luzbel
Luzbel
Skip Rango
  • Locked
  • Question
how to backup cisco sg500-52p switch
Replies
1
Views
576
madwok
madwok
BleuBell
  • Locked
  • Question
Command Rejected : Exceeded NNI ports Allowed
Replies
0
Views
255
BleuBell
BleuBell

Part and Inventory Search

Sponsor

Back
Top