Sonic VPN connections

[Trekk]

I have a question on configuring a SonicWALL to connect to a Cisco PIX

I have read all the documentation on configuring the SonicWALL 4060 with enhanced os version 3.1.0.7-4e

Here is my issue

We have an old SonicWALL 330 and we just purchased a SonicWALL 4060.

I am trying to match the configuration on the 330 with the 4060. I have several site to site VPN customers that work with the sonic 330, but since I installed the 4060 I can not get a site to site connection. The remote sites are using anything from a PIX to a Linksys router.

I have verified several times that the proposals match the sonic 330 on the sonic 4060.

Here is the error I get

56:25.4 Warning VPN IKE IKE Initiator: Received notify. NO_PROPOSAL_CHOSEN
56:34.3 Info VPN IKE IKE Initiator: Start Quick Mode (Phase 2).
56:34.4 Warning VPN IKE IKE Initiator: Received notify. NO_PROPOSAL_CHOSEN
56:43.3 Info VPN IKE IKE Initiator: Start Quick Mode (Phase 2).
56:43.4 Warning VPN IKE IKE Initiator: Received notify. NO_PROPOSAL_CHOSEN
56:44.7 Notice Network Access TCP connection dropped
56:50.3 Info VPN IKE IKE negotiation aborted due to timeout
56:50.3 Info VPN IKE IKE Initiator: Start Main Mode negotiation (Phase 1)
56:50.4 Warning VPN IKE IKE Initiator: Received notify. NO_PROPOSAL_CHOSEN
56:58.3 Info VPN IKE IKE Initiator: No response - remote party timeout
56:58.4 Warning VPN IKE IKE Initiator: Received notify. NO_PROPOSAL_CHOSEN
57:10.3 Info VPN IKE IKE Initiator: No response - remote party timeout
57:10.4 Warning VPN IKE IKE Initiator: Received notify. NO_PROPOSAL_CHOSEN
57:17.2 Info VPN IKE Received notify: INVALID_SPI
57:19.3 Info VPN IKE IKE Initiator: Start Quick Mode (Phase 2).
57:19.4 Warning VPN IKE IKE Initiator: Received notify. NO_PROPOSAL_CHOSEN
57:28.3 Info VPN IKE IKE Initiator: No response - remote party timeout
57:28.4 Warning VPN IKE IKE Initiator: Received notify. NO_PROPOSAL_CHOSEN
57:30.3 Info VPN IKE IKE Initiator: Start Quick Mode (Phase 2).

I also don’t understand what it is asking when I configure the access, IN the VPN setup

When it ask for the Local LAN and the Destination Network, Would the local LAN be where I want the VPN tunnel to be able to access from the remote site and the destanation be there IP addresses of their local LAN

Any help

Thanks

 

[joepc]

Source would be firewalled subnets and for destanation I you need to create an address object of the with subnet you are trying to connect to. ex. 192.168.2.0 255.255.255.0