Does anyone have any idea ( or if it's even possible) to convert 4.1 SW to 7.1 SW ????
Voice Connect Plus, Inc.
have a great day and a better tomorrow
Voice Connect Plus, Inc.
have a great day and a better tomorrow
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
software upgrade
- Thread starter atdjr123
- Start date
curlycord
Programmer
Did you mean copy 7.1 software over top of 4.1 PCMCIA card?
=----(((((((((()----=
curlycord
=----(((((((((()----=
curlycord
- Thread starter
- #4
Yes, do a copy over or copy to blank pcmcia card..
Voice Connect Plus, Inc.
have a great day and a better tomorrow
Voice Connect Plus, Inc.
have a great day and a better tomorrow
- Thread starter
- #5
Anyone familiar with this by ELAN Digital Systems Limited
MCE has an easy to use graphical interface Memory Card Explorer ("MCE" & "MCE/NT") is a graphical Windows software package which provides direct access to the data stored in flash, SRAM and ATA PCMCIA memory PC Cards. It allows the binary "image" of the card data to be saved to or loaded from the hard disk drive in simple and fast operations. Data between any two address blocks can be copied and edited.
The format of the data on the card is unimportant - it could be a TFFS style format, or it could be a proprietary format written by a logger or portable instrument, or it could contain a mixture of formats. In all cases MCE can access the data. Also included is a card viewer that allows direct hex display of the data on the card.
Voice Connect Plus, Inc.
have a great day and a better tomorrow
MCE has an easy to use graphical interface Memory Card Explorer ("MCE" & "MCE/NT") is a graphical Windows software package which provides direct access to the data stored in flash, SRAM and ATA PCMCIA memory PC Cards. It allows the binary "image" of the card data to be saved to or loaded from the hard disk drive in simple and fast operations. Data between any two address blocks can be copied and edited.
The format of the data on the card is unimportant - it could be a TFFS style format, or it could be a proprietary format written by a logger or portable instrument, or it could contain a mixture of formats. In all cases MCE can access the data. Also included is a card viewer that allows direct hex display of the data on the card.
Voice Connect Plus, Inc.
have a great day and a better tomorrow
curlycord
Programmer
Most of us use Elan.
Yes you can copy over it but depends on the card size....cant recall off hand the sizes.
=----(((((((((()----=
curlycord
Yes you can copy over it but depends on the card size....cant recall off hand the sizes.
=----(((((((((()----=
curlycord
curlycord
Programmer
I think it was 4 meg card for earlier releases vs 8 meg cards.
But this may apply for vmail only.
=----(((((((((()----=
curlycord
But this may apply for vmail only.
=----(((((((((()----=
curlycord
- Thread starter
- #8
I picked up a new 7.1 SW that looks like a copy to a blank. Not the standard issued Nortel PCMCIA. Thanks Curly, I'll do some research on it.
Voice Connect Plus, Inc.
have a great day and a better tomorrow
Voice Connect Plus, Inc.
have a great day and a better tomorrow
- Thread starter
- #9
Is the P423 Adapter from Elan good for this procedure???
Voice Connect Plus, Inc.
have a great day and a better tomorrow
Voice Connect Plus, Inc.
have a great day and a better tomorrow
curlycord
Programmer
Not sure on that one.
CICS
1.0 - 4 meg
2.0 to 4.0 - 6 Meg
4.1 to 7.1 - 8 Meg
MICS
8 megs
=----(((((((((()----=
curlycord
CICS
1.0 - 4 meg
2.0 to 4.0 - 6 Meg
4.1 to 7.1 - 8 Meg
MICS
8 megs
=----(((((((((()----=
curlycord
- Thread starter
- #11
Has anyone ever performed a copy from one to the other and is so what Hardware/Software needed.
Voice Connect Plus, Inc.
have a great day and a better tomorrow
Voice Connect Plus, Inc.
have a great day and a better tomorrow
- Thread starter
- #12
So I guess no one has ever performed this one. Guess I'm on my own. I'll keep y'all posted. By the way, Elan is End Of Life Curly. They went into liquidation in 2011 and are no longer manufacturing any products or updating any software.
Voice Connect Plus, Inc.
have a great day and a better tomorrow
Voice Connect Plus, Inc.
have a great day and a better tomorrow
- Thread starter
- #14
I had a look at the site and they are upgrade kits. I'm looking for something that will give me the ability to copy software from one PCMCIA to another. Copy over 4.1 or to blank PCMCIA
Voice Connect Plus, Inc.
have a great day and a better tomorrow
Voice Connect Plus, Inc.
have a great day and a better tomorrow
- Status
Similar threads
- Locked
- Question
