Software Daughterboards and releases supported

[CaperJ]

There was a post on this but I cannot find it. Does anyone have this info. As well any info on what releases are supported by the sw

 

[Sennback]

This is a list of daughterboards to the SSC card.
The list describes what daugtherboards that was possible to use at the time of introduction of the SSC software.

It's possible to use new (larger) flash daughterboards to old SSC cards if you are doing an upgrade to latest software. ALWAYS remember to upgrade BOOT CODE before doing the software installation.
On old SSC cards with an old release its sometimes necessary to upgrade Boot code before mounting the flash card.
If you are reinstalling old software,you have to use a flash card according to this list.

Rel 22 - NTDK21
Rel 23 - NTDK21, NTDK81
REL 24 - NTTK13, NTDK81
REL 25.15 - NTTK13
REL 25.40 - NTTK25AA, NTTK13
Rel 2 - NTTK25AA, NTTK13
Rel 3 - NTTK25AA, NTTK25BA, NTTK13
Rel 4 - NTTK13, NTTK25AA, NTTK25AB, NTTK25CA
Rel 4.5 - NTTK13, NTTK25AA, NTTK25AB, NTTK25CA