May 12, 2006 #1 grebnetso IS-IT--Management Joined Dec 15, 2005 Messages 76 Location US Is there a way to setup a switch to point it to a specific SNMP server or workstation using it's IP?
May 13, 2006 #2 jneiberger Technical User Joined Jan 21, 2005 Messages 1,791 Location US I'm not sure what you're asking. Are you asking if you can configure the switch to send SNMP traps to a specific server? snmp-server host 10.1.2.3 (as an example) John Upvote 0 Downvote
I'm not sure what you're asking. Are you asking if you can configure the switch to send SNMP traps to a specific server? snmp-server host 10.1.2.3 (as an example) John