sls and bri

[big70]

Can somebody give some pointers for the trunk group in sls-mode in holland.

G350-003(super-survivable-call-engine)# show trunk 1
Group Type Dial Tac Supervision Treat Insert
----- ------------ ------ ---- ----------------- ------- ------
1 bri dtmf 8101 - blank
Name=Backup
Ports=v301,v317
Codeset Codeset Channel Digit Japan Send Send Number Trunk
Display National Preference Handling Discon Name Number Format Hunt
-------- -------- ---------- --------------- ------ ---- ------ ------- --------codeset6 codeset6 preferred enbloc-enbloc no yes no public cyclical


Its like this and can call outside true the bri if the g350 is registerd but not in sls mode??

Greets Peter

 

[MrComms]

Hi peter,

If you can dial out when its in surrvivable mode there should be no reason that you cant dial out in lsp unless the translations you have entered recently have not been pushed across.

First off do a save trans lsp and wait 5 minuites

next from an ext on the remote site do a list trace station and select the tac number of that trunk group and try and dial out.

if this works all should be ok if not reply with the results

Cheers

jon

 

[mrjedi]

According to the documentation, SLS does not support BRI trunks. Only CO trunks will work. See below


SLS does not support the following functionality in Release 3.1:
? Many small business customers employ custom calling features like call waiting from the
BOC/LEC, attempting a more PBX-like capability. These features are not supported by
SLS.
? ISDN BRI trunks
? E1/T1-PRI trunks

 

[big70]

First its an sls and not lsp??
Second in 4.0 bri is supported.

Also in the G350 like above i have configured it but thinking there is a small thing im missing.

But thanks for the response.

Greets Peter

 

[knoester]

i think that you have to quit the whole project and leave the company you are working for.