Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Slot 0 question

Status
Not open for further replies.

mabery

Technical User
Oct 1, 2001
125
GB
On OPT 61, I need to add 2 Digital Line cards and there are 2 open '0' slots on various shelves, these appear to wired back to main distribution frame. Can they be used and I just ENL card ? and build 1st extn to check it works ?
 
If you have identified these as an IPE Shelf, which it sounds you have confirming your backplane wiring then you can slot the card in, enable the card and build your digital port/s, assuming you have the TN Licences?
Cheers!!
 
Ok, there are lots of spare tn's. It has 1200 extns currently. This should be okay ?
 
yes that should be fine.. the licences has nothing to do with slots, but are just software keycodes.. ld 22 slt will show you how many more sets you can put on those cards

john poole
bellsouth business
columbia,sc
 
port 0 is not any different then any other port.. any slot in an ipe can be used for any type of card..

john poole
bellsouth business
columbia,sc
 
okay ld 22 TNS left 31221, digital telephones left 29 ?
 
You can only add 29 more digital sets, if you are planning any expansion, I would get an order in with your vendor
 
this would require software update to expand digital and analogue sets as there are just a few left as well ?
 
depending on your release, it's an ISM upgrade, can be done during the day w/o interuption. Generally, the vendor will send a tech to do it and it takes 5 minutes!
 
or they can e mail you the new keycodes, do it yourself and may save the trip charge... ld 143 knew

john poole
bellsouth business
columbia,sc
 
I only have 3 slot 0 spare on the system. So it looks like I will need another shelf. current software 25.15
 
As a reminder it doesn't have to be slot '0' it can be all slots 0-15 as long as the backplane is cabled to match
Cheers!!
 
You can put it in any Slot 0 to 15 if it is wired to the MDF.

Put the card in and program a set to it to ENABLE it.
 
there are only 3 spare slots left on the whole system, and I need 4 DLC & 2 FALC's so I will need another cube to installed and wired out, do I need to upgrade the software or just order the cube OPT 61 on v 25.15
 
Goto LD 20
REQ LUC This will list all unused card slots in system.
 
In LD 20 LUC shows:-
001 0 1
001 0 3 - 10

008 1 0
012 1 0
028 0 0
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top