daveinwearside
Programmer
How would I set up a SIP trunk to another node on the same network?
what would i put in the ITSP box ect
ta
Dave
ACSS SME
APSS SME
what would i put in the ITSP box ect
ta
Dave
ACSS SME
APSS SME
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
sip trunk on same network
- Thread starter daveinwearside
- Start date
- Status
amriddle01
Programmer
we have specific addresses for the faxing on a couple of ours,
so sip.orcacom.co.nz for the registration based trunks, then trunk.orcacom.co.nz for direct SIP trunks, no reg.
then fax.orcacom.co.nz for G.711 or T.38 connections with reinvite support etc etc on the Avaya.
so a completely different new SIP trunk created for the faxing.
They all end up at the same IP address though, 202.180.76.167
so sip.orcacom.co.nz for the registration based trunks, then trunk.orcacom.co.nz for direct SIP trunks, no reg.
then fax.orcacom.co.nz for G.711 or T.38 connections with reinvite support etc etc on the Avaya.
so a completely different new SIP trunk created for the faxing.
They all end up at the same IP address though, 202.180.76.167
- Thread starter
- #4
daveinwearside
Programmer
cheers chaps its a start!
ACSS SME
APSS SME
ACSS SME
APSS SME
amriddle01
Programmer
IPOAKL, Dave is building a SIP trunk to an internal Fax server, what you are quoting looks to be an external setup to an ITSP 
- Status
