Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sip trunk call incoming calls not working

Status
Not open for further replies.
Pete720

Pete720

IS-IT--Management
Joined
Mar 29, 2014
Messages
17
Location
US
Hi,
I configured SIP trunk in my Branch router. When I do show isdn status, it shows "Multiple frame estabhlished". But i am not able to make any calls out to PSTN and also cannot receive any calls from PSTN and HQ phones. HQ is configured with MGCP.
 
Sort by date Sort by votes
I was able to figure it out. I Forgot to assign the port to pots dial peer. Now its working fine.
Thanks
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

keyset6
  • Question Question
Skillet effect on calls in queue
Replies
1
Views
92
keyset6
keyset6
TIgerV
  • Locked
  • Question Question
Inbound trunk no disconnect
Replies
5
Views
730
ISDNman
ISDNman
Gnjiro
  • Locked
  • Question Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
1K
thepfy
thepfy
keyset6
  • Locked
  • Question Question
Resume call on hold from an ATA line
Replies
0
Views
332
keyset6
keyset6
wolf8963
  • Locked
  • Question Question
Grandstream HT841 with call manager
Replies
3
Views
1K
wolf8963
wolf8963

Part and Inventory Search

Sponsor

Back
Top