SIP Access Ports

[pshook]

I have 24 SIP trks that have been working for months. Last week I had an issue with CCM 6.0 that caused the CS1000 to switch CPU's. I switch the CPU's back and I lost all IP phones and had to reboot them. Now the SIP trks will not register and the dch will not est. Any Ideas? Do I need to reboot the sig servers? Is there a simple command that I am missing?


NPR000
.stat vtrm 0 100

************************************
STATUS OF VRTL IP TRK ROUTE AND MBRS
************************************

================================
CUST ROUTE PROTOCOL CALL_DIRCTN
0 100 SIP IN AND OUT

DCH 40 SSRC TOTAL 1800 SSRC USED 24 SSRC AVAILABLE 1776

MBR STATUS

IDLE UNREGISTERED 24
IDLE REGISTERED 0
BUSY 0
MBSY 0
DSBL UNREGISTERED 0
DSBL REGISTERED 0
LCKO 0

.

 

[pshook]

I have answered my own question. Thanks for looking. In the element manager there is a place to reset the virtual trunk application and that got everything working.