Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

simple home lab question... 1

Status
Not open for further replies.
admoore

admoore

IS-IT--Management
Joined
May 17, 2002
Messages
224
Location
US
Is it OK to install & swap serial DCE / DTE cables on a powered-up router? How about on shut vs opened interfaces?

TIA,

-A



 
Sort by date Sort by votes

admoore,

If I am doing major work on my Cisco lab, I power it down, but I have changed serial cables with the routers up and running and with the interfaces "Up" or "Down".

You just DON'T want to hot swap and WICs or Network modules!!!!!

Hope this helps !!!

E.A. Broda
CCNA, CCDA, CCAI, Network +
 
Upvote 0 Downvote
Serial interfaces shouldn't be a problem as the pins on the plugs are supposed to vary state between up and down!!!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

djtech2k
  • Locked
  • Question Question
Study Questions for Comptia A+
Replies
0
Views
551
djtech2k
djtech2k
lanswitcher
  • Locked
  • Question Question
Free Cisco Catalyst Switch Lab
Replies
1
Views
325
fenderjbass
fenderjbass
mjb6x3
  • Locked
  • Question Question
Help for Cisco 2600 Router Set Up For Home Lab
Replies
1
Views
352
lerdalt
lerdalt
NXSIM
  • Locked
  • Helpful tip Helpful tip
Cisco IOS Simulator with CCNA Labs - on Android!
Replies
0
Views
437
NXSIM
NXSIM
NXSIM
  • Locked
  • Helpful tip Helpful tip
Cisco Router Simulator with CCNA R&S Labs for Android iOS Kindle!
Replies
3
Views
554
NXSIM
NXSIM

Part and Inventory Search

Sponsor

Back
Top