Hey i just got a new shuttle ak31a mobo. I have a gf2 pro, crucial 256 ddr. When i start up the system there is no picture on the monitor. I can hear the hard drive thinking all all. When I first start it up, the mobo makes a long beep. I don't know what that means... Any ideaS?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SHUTTLE AK31A HELP
- Thread starter Palentino
- Start date
Vansplatter
IS-IT--Management
Check the motherboard (more specifically the BIOS)manufacture's website for the beep codes. May be a bad seat on the memory, but more than likley a bad seat on your AGP?PCI? Video card. Check all connections and then check them again 
Remove and reseat everything. Good Luck and Happy New Year.
Remove and reseat everything. Good Luck and Happy New Year.- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question