May 6, 2003 #1 JPCPB Technical User Joined May 6, 2003 Messages 97 Location GB I'm wondering what do the following mean in the Slot Context > CPU > State section of the SHOW CPU /FULL command: RC, PA, PP, CV, PV, PMV, PL. Thank you in advance! Kindest regards, James
I'm wondering what do the following mean in the Slot Context > CPU > State section of the SHOW CPU /FULL command: RC, PA, PP, CV, PV, PMV, PL. Thank you in advance! Kindest regards, James
Jul 28, 2003 Thread starter #2 JPCPB Technical User Joined May 6, 2003 Messages 97 Location GB Is no-one able to answer this - or, at least, point to a possible answer source? Upvote 0 Downvote
Aug 4, 2003 #3 jlshp Vendor Joined Aug 8, 2001 Messages 9 Location US Have you looked in HELP SHOW CPU? Upvote 0 Downvote
Aug 4, 2003 Thread starter #4 JPCPB Technical User Joined May 6, 2003 Messages 97 Location GB Thank you for your reply, JLSHP. The HELP SHOW CPU does not include this information. I think they refer to arrays, registers and pointers - but I need a solid DEC engineer to confirm/deny this and indicate what these actually mean. Upvote 0 Downvote
Thank you for your reply, JLSHP. The HELP SHOW CPU does not include this information. I think they refer to arrays, registers and pointers - but I need a solid DEC engineer to confirm/deny this and indicate what these actually mean.
Aug 5, 2003 #5 sam451 Vendor Joined Aug 5, 2003 Messages 1 Location US what kind of DEC system do you have? alpha or vax? Upvote 0 Downvote
Aug 6, 2003 Thread starter #6 JPCPB Technical User Joined May 6, 2003 Messages 97 Location GB VAX 8800 Upvote 0 Downvote