Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
shared ports
- Thread starter ynilanga
- Start date
Shared ports are always Gigabit ports and have two possible connectors - the built-in 10/100/1000 Copper port or an SFP port. Typically the lower end switches will have these. For example on a 24-port switch ports 1-20 are 10/100/1000 copper ports but ports 21-24 could be shared ports where each port has a 10/100/1000 copper port or an SFP slot. You can't use both on the shared ports.
Andy
Andy
- Status
Similar threads
- Locked
- Question