68.0.0.0/32 is subnetted, 2 subnets
68.147.66.4 is directly connected, Dialer1
68.219.204.148 is directly connected, Dialer1
My dialer int is set up to negotiate the ip address.
I can ping 68.219.204.148 from the router but, not 68.147.66.4 My crypto is set to 68.147.66.4 and the tunnel is up and I can pass traffic.
I'm using a 827 adsl cisco router and no equipment from bell south. Bellsouth told me my gateway is 192.168.1.254, but I find that hard to believe. Any way- What do you think the
68.219.204.148 is? If I do a trace everytinng goes out 68.219.204.148. So I'm thinking is the gateway, but I could be wrong.
Type escape sequence to abort.
Tracing the route to 10.1.2.165
1 68.219.204.148 12 msec 12 msec 8 msec
2 68.216.200.89 20 msec 16 msec 20 msec
3 205.152.137.81 16 msec 20 msec 20 msec
4 * * *
Also my routes are set to go out the dialer 1 interface. I have a default route 0.0.0.0 0.0.0.0 di1
THX.
Eric - A+, Net+, INet+ CCNA next week.
Network Admin/Helpdesk II
68.147.66.4 is directly connected, Dialer1
68.219.204.148 is directly connected, Dialer1
My dialer int is set up to negotiate the ip address.
I can ping 68.219.204.148 from the router but, not 68.147.66.4 My crypto is set to 68.147.66.4 and the tunnel is up and I can pass traffic.
I'm using a 827 adsl cisco router and no equipment from bell south. Bellsouth told me my gateway is 192.168.1.254, but I find that hard to believe. Any way- What do you think the
68.219.204.148 is? If I do a trace everytinng goes out 68.219.204.148. So I'm thinking is the gateway, but I could be wrong.
Type escape sequence to abort.
Tracing the route to 10.1.2.165
1 68.219.204.148 12 msec 12 msec 8 msec
2 68.216.200.89 20 msec 16 msec 20 msec
3 205.152.137.81 16 msec 20 msec 20 msec
4 * * *
Also my routes are set to go out the dialer 1 interface. I have a default route 0.0.0.0 0.0.0.0 di1
THX.
Eric - A+, Net+, INet+ CCNA next week.
Network Admin/Helpdesk II