I build project for client. Now I using Setup Wizard to create distribute application to client. After I finished, I try to test installation. Unfortunately, installation gives me error “Setup was not completed successfully”. I think I include all files need to support my project. If anybody can help, I will be gracious appreciative.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Setup Wizard Problem 1
- Thread starter sdmi
- Start date
-
1
- #2
Since there is a Setup Wizard in VFP 3, 5 and 6 it's somewhat important to know the version and Service Pack level you are using. e.g. There were upgrades to the Setup Wizard for both 5 and 6, which depending on the SP you might not have. (See and the links from there for details!)
Next, I've always found it important to follow the directions for using the wizard - many people skip the step of moving (copying) the files to be installed to a directory away from the development area. Not closing the project can also cause problems.
Rick
Next, I've always found it important to follow the directions for using the wizard - many people skip the step of moving (copying) the files to be installed to a directory away from the development area. Not closing the project can also cause problems.
Rick
- Status
Similar threads
- Locked
- Solved
