Setup 9608 on IPO Version 9

[clindsay1]

Can anyone send me directions or a link on how to setup/build a 9608 on IPO? I normally use 9508, So this is my first deployment of 9608. I have phones connected to a Cisco 3850 Switch with a voice vlan. DHCP scope is running built and activated on a Windows 2012 R2 Server.

Thanks

 

[intrigrant]

http://downloads.avaya.com/css/P8/documents/100169217

 

[hairlessupportmonkey]

Build a 9608?

I didnt realise you can get them in kit form?



ACSS - SME
General Geek

 

[intrigrant]

You can, with or without instructions, for the die-hard fanatics

 

[Okkie26]

I prefer the instant version.

Just pour 100ml water over it, shake it and ready

 

[gwebster]

@intrigrant - you provided the link to the Admin guide for release 3.2. The 9608 uses release 6.x. Correct link to the latest 6.x Admin Guide is

https://downloads.avaya.com/css/P8/documents/100180457.

 

[intrigrant]

What is the difference? It was the first link which came up in Google, good enough as the important stuff is the same.

 

[gwebster]

Many more configuration parameters in the 6.x software compared to 3.x.

 

[intrigrant]

Yes but 99.9% for CM