Setting wave volume?

[Monkfish]

Hi, I've set a wave file playing as part of a timeline, but is there a parameter that will allow me to set its playback volume?

Here's the relevant line:

<EMBED NAME='CS1003483177360' SRC='hello.wav' LOOP=false AUTOSTART=false MASTERSOUND HIDDEN=true WIDTH=0 HEIGHT=0></EMBED>

I don't know what MASTERSOUND means, but maybe there is some other parameter that will set the volume.

 

[Rydel]

By the way, this is off-topic, but there is a related question that has been buggin me for months. My WinAmp would reset the level of WAVE volume (every time a new song starts on the paylist) to the level it was during the last boot. I need to adjust it properly and then restart the computer. Isn't it stupid? And sorry for the silly lamer's question ;-) ) ---

http://www.geocities.com/rydel23/

---

 

[Rydel]

never mind. it's just on winamp's skin the volume control was hardly visible, and of course it adjusts the wave volume after every song according to its positions.
---

http://www.geocities.com/rydel23/

---

 

[Monkfish]

To answer my own question...

It's simply the instruction VOLUME=X

where X=-1000 to 0 (min to max)

Doh!