Setting up WatchGuard.

[rolmank]

Hi all, I'm new to WatchGuard. Need some advices on the setup.

Currently, my company internet access is using ADSL and we are using a ADSL Router,which have NAT configured.
So our Gateway is the ADSL Router NAT ip address,which is 172.x.x.x

But I have a watchguard which I'm intend to set it up.
Can I setup Wathguard into current network configuration.
Since the ADSL Router have a static private ip address,is there anything that I need to configure on the watchguard.

Need advices urgently.

Thx inadvance.

 

[lhuegele]

Since your Firebox will take over the NAT functions, you need to reprogram your router for simple pass through duties. You will need an external IP address for your firebox as well.

Good luck,
Larry