Setting up RRAS

[jakhan]

Dear folks

I want to install and configure RRAS on my WIN2K (DC)
it has 2 NICs, One of them has external IP.

please guide me how do i configure NAT using RRAS, so that all clients can access internet over NAT.

Also please tell, do I have to configure DHCP too?

thanks

Jahangir

 

[MattWray]

Here is a link for setting up RRAS for routing,

http://support.microsoft.com/default.aspx?scid=kb;en-us;Q299810&sd=tech

And here is one for NAT,

http://support.microsoft.com/default.aspx?scid=kb;en-us;Q310357&sd=tech

One extra thing. I usually have found I need to add a static route to the Internet. In the RRAS snap-in, expand IP Routing and Right-click static routes. Add new, dest 0.0.0.0 mask 0.0.0.0 gateway will be the IP of your External Interface.
DHCP is up to you. You can use it, but you don't have to.
See where these get you and post back.

Thanks,

Matt Wray
MCSE, MCSA, MCP, CCNA

http://www.sss-steel.com

http://www.total-tec.com