Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
setting up console
- Thread starter stevof
- Start date
stefanwagner
Programmer
a) check, whether your kernel supports framebuffer.
If yes:
b) if you use lilo as bootloader, then insert into /etc/lilo.conf:
vga=ask
c) run lilo
d) At the boot-prompt, test the different modes.
If no:
b2) reconfigure the kernel, enable framebuffer things.
b3) make new kernel
c3) install it
d3) continue at b)
If yes:
b) if you use lilo as bootloader, then insert into /etc/lilo.conf:
vga=ask
c) run lilo
d) At the boot-prompt, test the different modes.
If no:
b2) reconfigure the kernel, enable framebuffer things.
b3) make new kernel
c3) install it
d3) continue at b)
- Status
Similar threads
- Locked
- Question