Setting Up Call Waiting Redirection

[Telephonist]

I'm trying to set up Call Waiting Redirection on a 3902, and it isn't working. I enabled the feature in the CDB (CWRA), and set the phone up with a Call Waiting key, but calls into the busy set go straight to voicemail like the feature isn't enabled in the switch. The TNB and RDR_DATA portion of the CDB are attached below.

Any ideas or suggestions?

There wasn't any mention in the NTPs, but do I have to INI or SYSLOAD the switch for the CDB change to take effect? Thanks.

DES R1V50
TN 144 1 02 03
TYPE 3902
CDEN 8D
CTYP XDLC
CUST 0
FDN 6060
TGAR 15
LDN NO
NCOS 4
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
SCPW
CLS CTD FBD WTA LPR MTD FNA HTA TDD HFA GRLD
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWA LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDD CFXA ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND FLXD FTTC DNDY DNO3 MCBN
CDMR
CPND_LANG ENG
RCO 0
HUNT 6060
LHK 0
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 7336 0 MARP
CPND
NAME XXXXXX XXXXXX
XPLN 14
DISPLAY_FMT FIRST,LAST
01 AO6
02 CFW 8 7930
03 CWT
04 TRN
05 MWK 6060


RDR_DATA
OPT CFO CFRD PVCD CWRA MCI
FNAD HNT
FNAT HNT
FNAL HNT
CFTA YES
CCFWDN
CFN0 4
CFN1 2
CFN2 6
DFN0 4
DFN1 4
DFN2 4
DNDH NO
MDID YES
NDID YES
MWFB NO
TRCL 0
CRT0 00 00 05 59
CRT1 00 00 00 00
CRT2 00 00 00 00
CRT3 00 00 00 00
DAY0 1 2 3 4 5 6 7
DAY1
DAY2
DAY3
HOLIDAY0
HOLIDAY1
HOLIDAY2
HOLIDAY3

 

[worldwidedialtone]

Have you taken a look at the feature guides book 1 of 3, they have a section on Call Waiting redirection.

MIKE

 

[Telephonist]

Yes I have