Setting up a remote IP phone to work with LG Nexer LDK24

[shamp00]

Hi. I have managed to get hold of an LG Nexer LDK24 and was thinking of using it to replace my current GDK16 set-up. I know how to program the GDK16 and have the manuals etc, but am new to the LDK24 and haven't been able to find anyone who can give me or sell me a manual!

What I was wanting to know was whether it would be possible to set up 2 or 3 IP phones as extensions on this system - ideally in remote locations (ie over the internet).

I can get into the admin screens of the LDK24 but can't work out what to click on / how to configure the system to support this, if indeed it is possible. The system's software version (from doing PGM 72) is: LGE/UK24P-1.0If OCT/04.

Any advice would be gratefully received!

 

[doktor]

The NeXer or LDK-24 running "LGE/UK24P-1.0If OCT/04" cannot "run" with IP phone - only IP trunks. So you need to get hold of a Nexer in version 3.7. (new hardware).
See my details below:

http://www.kandu.dk/spg97163.aspx

(I have some manuals).

///doktor

 

[shamp00]

Many thanks for such a speedy and helpful reply!

 

[doktor]

http://www.kandu.dk/spg153996.aspx

///doktor