jcokonougher
IS-IT--Management
I have an NEAX 2000 IPS with Inaset 240G phones. I am trying to set up a call pickup group, but I can't seem to get it to work. What are all the commands needed to set up a call pickup group?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Setting up a Call Pickup Group
- Thread starter jcokonougher
- Start date
- Status
simonellen2000
Programmer
You need:
CMD16, y = 0
CMD20, y = 0-3
CMD90, y = 00
CMD 16 is to program the pick up group
CMD 20 is to assign the access code for the pick up group feature
CMD 90 is to assign the pick up button to a Dterm key
CMD16, y = 0
CMD20, y = 0-3
CMD90, y = 00
CMD 16 is to program the pick up group
CMD 20 is to assign the access code for the pick up group feature
CMD 90 is to assign the pick up button to a Dterm key
- Thread starter
- #3
As previously stated by OzzieGeorge check for manuals.
Take a look at the feature programming manuals.
Mextera
Take a look at the feature programming manuals.
Mextera
OzzieGeorge
Programmer
And don't forget to complete the circle of the group and repair the circle on any groups you take extensions from.
- Status