This post is good: thread798-1712880
----
If your system is 5.x or newer, you can implement misdial prevention in LD24 ESA - the only other method is this:
[URL unfurl="true"]http://www.ghtrout.com/files/911_misdial_prevention.html[/url]
If your system is newer than Rls 3 but not yet Rls 5: Get this patch: MPLR20340 - This will set misdial prevention to the default settings (Note you will not see the new MISDIAL_PREVENTION prompt, but subsequent digits dialed, or hangup withing 2 seconds will get fast busy)
This is where 911 lives in a sample site of mine - it is Rls 5 as of this post.
[tt]>ld 24
ACC000
MEM AVAIL: (U/P): 45647383 USED U P: 5435121 530165 TOT: 51612669
DISK SPACE NEEDED: 842 KBYTES
REQ prt
TYPE esa
CUST 0
CUST 0
ENTR 0
ESDN 911
ESRT 29
DDGT 911
MISDIAL_PREVENTION YES (Things like 9,112125551212 are blocked)
MISDIAL_DELAY 4 (If user hangs up in 4 or less seconds, call is blocked)
ALOW_LASTDIG_REPEAT NO (this means 911[highlight #73D216]1[/highlight] is blocked)
DFCL 4145551212 - your main number
OSDN (You can assign a phone to ring when 911 is dialed, but it is such a lousy feature, I refuse to post the details)
VOLO_COUNT 0
MEM AVAIL: (U/P): 45647383 USED U P: 5435121 530165 TOT: 51612669
DISK SPACE NEEDED: 842 KBYTES
REQ[/tt]
~~
Gene at
GHTROUT.com