Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Setting Time and Date in LD2 w. Meridian 11 System
- Thread starter cr8z3d
- Start date
zog99
Technical User
- Feb 26, 2005
- 105
LD 2
To check the current date and time setting type :-
.TTAD
The current date and time will be listed, for example
.TTAD TUE 26 10 2004 18 34 21
The command sequence needed to correct the time is STAD followed by the date then the time in 24 hour format including the seconds.
The date can be entered as 26 10 04 (day, month and year) and the time 19 10 00 (Hours, minutes and seconds).
The full sequence for example is
.STAD 26 10 04 15 25 00
Press the return key to update.
To check the current date and time setting type :-
.TTAD
The current date and time will be listed, for example
.TTAD TUE 26 10 2004 18 34 21
The command sequence needed to correct the time is STAD followed by the date then the time in 24 hour format including the seconds.
The date can be entered as 26 10 04 (day, month and year) and the time 19 10 00 (Hours, minutes and seconds).
The full sequence for example is
.STAD 26 10 04 15 25 00
Press the return key to update.
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Question